|
|
Custmize cable with DB9 connector, POGO connector etc. for CAN / J1939 network, J1708 network, NMEA 2000 network.
A 3"x3" CAN Bus Development PCB, supports 1x CAN, 1x RS232, 1x RS485, 4x analog inputs, 3 push button inputs, 1x buzzer output, 8x LED output, etc.
A 3.25"x4" OBD Development PCB, supports 2x CAN, 1x RS232, 2x RS485/J1708, 1x ISO9141, 1x J1850 VPWM, 1x J1850 PWM, 1x SW-CAN, 1x Lin, 4x analog inputs, etc.
A 1.19"x2.125" Mini-Gateway Development PCB, supports 1x CAN, 1x RS232, 1x RS485/J1708, 1x push button, 1x LED, 1M bit EEPROM, etc.
A 2.84"x1.26" PCB for PICkit 2 Do It Yourself (DIY) project, supports full function of Microchip PICkit 2, enhanced features include: stand-alone power supply, RJ12 6 pin ICSP interface, etc. With a RJ12-reverse-cable, It can easily work with target board developed for ICD2.
The 2-in-1 and 3-in-1 Mini-Labs are handy, low cost tools capable of programming, debugging and testing Flash-based PIC Microcontroller, KEELOQ HCS, MCP250xx and EEPROMs.
|
|
|
