Customer Comments

These comments are unsolicited remarks from some of our customers - for privacy reasons we don't put their full names here, but we are happy to provide verification upon your request. (Since April-2011, we have used the online store exclusively for customer comments, this page will be kept in a as is condition.)

Richard (USA) 03-18-2011
One extraction device from another vendor did not perform correctly in real world testing. Your “J1939 Data Center” I am happy to say worked correctly and we are ready to move forward with more real world testing.

W.S. (Canada) 01-26-2010
Your units worked like a charm. (J1939 Interpreter)

L.V.D.C. (Philippines) 10-30-2009
I can't thank you enough for your communication with the MJ (magicJack)representative. I finally made my first call out. ... ... I will keep your contact no. for future reference and will tell others who have the same problem as mine.

J.S. (Brazil) 09-10-2009
The packaged (J1939 Simulator) arrived today (SET, 10th). Thanks for your help.

J.D. (New Zealand) 8-3-2009
Thanks, my BB0703+128K has arrived and works well.

S.P. (USA) 7-29-2009
Thank you very much for the detailed response.  You have answered every question I had!

R.B. (Netherlands) 5-06-2009
By the way I do like your programmer very much as it is a small and nicely contained unit. In the future, after further development, I will need quite some more as we can give it to our distributors for updating for new software releases.

S.R. (Argentina) 4-22-2009
Thank by now for the info provided on understanding J1939 protocols, very useful.

J.V. (Brazil) 2-23-2009
I get to receive the data from your simulator. Thank you very much for the information.

R.D. (Australia) 02-09-2009
MagicJack appears to be working (at Australia). Thank you.

V.R. (France) 02-09-2009
I could simulate a request PGN for the PGN (FEE6) Time/date, and I have received the expected PGN (from the J1939 simulator). Thank you for all. Your answers helped me a lot.

C.S. (USA) 12-03-2008
I wanted to thank you for your support last month in getting this working. ...

B.A. (USA) 11-24-2008; 02-06-2009
I got it (magicJack), and it works VERY well! I love the Magic jack.

C.S. (USA) 11-14-2008
Just want to thank you for your help yesterday.  This morning with your information I was able to successfully start reading and decoding CAN packets.  The baud rate and my filter settings where the key.

J.V. (Brazil) 11-11-2008
I am impressed with your attendance. The secret of the success is a good product and a good attendance. I believe that you have both.

D.H. (USA) 10-31-2008
I'm catching on now, thanks for the quick reply.

R.W. (USA) 10-11-2008
BB0703. Got it. Used it. LOVE IT!!! Thank you for a great product.

G.F. (Canada) 10-08-2008
We are very pleased with your J1939 Simulator. Are there any plans to implement an *** simulator?

R.L. (Brazil) 10-05-2008
I just recommend your BB0703 (PicKit2) to the OshonSoft list. Nice product.

R.K. (Canada) 9-16-2008
Thanks for the help on ......, it (J1939 Simulator) works great.

N.H. (Canada) 9-09-2008
... the parcel (J1939 simulator) just came through the door.  Thanks for your help, ...

R.L. (Brazil) 9-09-2008
Thanks for ..., It (BB0703) takes about 20 days to be delivered at my home, intact.

L.K. (Serbia) 9-02-2008
Today I received your mail with BB0703 (PicKit2). Everything seem to be OK. Thank you for ...

S.M. (Australia) 8-06-2008
Thank you for your (very quick) assistance. ... It's nice to know that there is some support for if (or when!) I next get myself into trouble.

S.B. (England) 7-23-2008
Thanks a lot for your email. It did clarify a lot on J1939 (protocol itself) and I can properly use your J1939 simulator now.

G.B. (South Africa) 7-17-2008
This is to let you know that I have received the Programmer (BB0703) in good order, and it has already allowed me to rescue a programmer bought from XXXXXX (firm with a LOUSY service for the clients,......) Thanks for a neat service. I can now use my 690's !!

R.K. (Canada) 7-14-2008
Thanks for the help (with J1939 simulator), I found the problem and resolved it. ... This is likely just another problem in 'my' src code. ...

B.D. (USA) 7-14-2008
My compliments on a nice kit (Combo0703) – very easy to assemble.

M.L. (USA) 7-1-2008
We received both packages (SAE-J1939 simulators) yesterday afternoon. Thank you very much for your work in getting these to us quickly.

R.R. (USA) 6-13-2008
I went back to trouble shoot (CB0703 (PICKit 2) DIY assembly) and ran it and all checks out ok.  It is all working like a champ. Thank you so much for your help...

D.E. (Canada) 6-6-2008
It (J1939 Simulator) was received Thursday A.M. thank you very much.

R.K. (Canada) 6-5-2008
Yes we got the J1939 simulator, thank you, playing with it right now

F.J. (Sweden) 6-5-2008
I placed my order on Thursday and received the BB0703(PICKit2) on Monday. Can it be faster? =). Very nice device, and the price is unbeatable!

H.M. (USA) 5-24-2008
I did receive the J1939 simulator. It does seem to work well.

J.A. (Sweden) 5-22-2008
I just programmed my BB0703(PICKit2) with the latest firmware, and now it works lika charm again! Thanks for the tip!

R.G. (Mexico) 5-20-2008
Now (CB0703 (PICkit 2) DIY assembly) is finished and working......I like very much your design, is smaller than the original pickit......

K.B. (USA) 5-1-2008
my pickit (CB0703 DIY kit) worked the first time out after assembly......Great smd kit........

P.M. (USA) 4-27-2008
That "part tray" thing on the last 3 pages of CB0703 DIY kit is probably one of the smartest things ive ever seen in a DIY kit. It looks like a great product...

K.P. (Latvia) 4-23-2008
Package (BB0703 (PICkit 2)) arrived yesterday, so it took a week and a day. Faster than I would hope for:)

R.M. (Canada) 1-11-2008
Great progress (CB0703 (PICkit 2) DIY assembly). All works, Programmed a 16F84A and a problem chip the 16F737 needing the full 5V without any problems at all. And thanks for all the help.

S.C. (Australia) 12-30-2007
An excellent product (BB0703 (PICkit 2)) and backup.

J.A. (Sweden) 12-06-2007
I received my Combo0703 this monday and assembled it yesterday, and it works great! Thanks!

D.G. (Italy) 11-07-2007
It (BB0703 (PICkit 2)) has ARRIVED! I miracle indeed :) ... ... looks nice and working :)

J.R. (Australia) 10-22-07
Bit (CB0703 (PICKit 2) DIY kit) arrived already. Thanks for the good service. Nice touch sticking the parts to a reference sheet too. :)